Hardwood Flooring Products

Services

Prefinished & Unfinished Flooring

Prefinished means the color choice of stain already exists on the wood from the factory. Some Prefinished are nailed in and some are Click & Lock. Unfinished means it’s raw wood, that’s nailed in and you pick your color to go on it. The color can also be resanded off in the future to change it.

Installation of any Chosen Wood

We have a variety of raw wood, Prefinished, Laminate & Luxury Vinyl Tile. We offer a variety of sizes ranging from 2 ¼” to 8”.

Sand & Finish

When we refinish the floors, we sand them with our big sander machines that have sandpaper on them, which brings the floor to a original raw state, then we stain the floor & three coats of finish to complete it.

Screen & Coat

Sandless Refinishing (rejuvenates & transforms without Sanding)- Consider this maintenance done every 2-3 years. We take the top coat of finish off and recoat it.

Custom Base Colors

You can chose an existing color or we can “Mix Colors” for a Custom look that no one else will have.

Variety of Hardwoods

White Oak, Red Oak, American Cherry, Brazilian Cherry, Walnut, Bamboo, Maple, Brazilian Walnut, Mahogany and the most popular is Hickory. We have exotic woods as well Chestnut, Teak & Australian Cypress.

Glista Finishes/Commercial Finishes (ex: street shoe & traffic)

This finish is Commercial Waterbase finish and not all oil. There’s a huge difference in the way it dries quicker, the way it endures and the look of it.

Medallions

These are custom circular designs or even of animals that we put in the middle of the floor. Medallions look beautiful in foyers, professional office or maybe even in a great room for visual interest.

Diagonal & Custom Installs

We’ll put your floor on a 45 degree angle or in any design you can think of.

Herringbone

A specific back and forth, zig zag pattern.

Checkered

This is a checkered pattern, like a checker board. We can do black and white or gray and white. Any color combination of two colors.

Borders

A border goes around the perimeter of the room and then we straight lay wood in the center or Area Rug in the center.

 

Extras

Chair Pads

Chair pads are available upon request to protect your new wood floors.

Mop Kits

Mop kits are available for purchase to clean your wood floors.

Humidity control information

INFO NEEDED!

Customer Education

It’s important to know what you’re purchasing, so we educate the consumer on their choices and their products.

Professional & Courteous Crews

All of our Crew members are kind and courteous to people when doing their jobs. They show up on time and quickly get the job done.

Wood Vents/Shoe Molding

Replace your old metal vents with flush wood vents. Shoe molding is what goes all around the perimeter of the floor, next to the wall.

Reducers

This is like a miniature ramp for height differences in floors, such as going from wood to vinyl.

Stairs/Nosings

We can install wood to stairways and nosings for the edge of the stairs. However, we do not do spindles.

T-Mold

A molding that can be applied in between two rooms.

Threshold and Oak Carpet Bar

This is applied if there is a height difference.

Services

Prefinished & Unfinished Flooring

Prefinished means the color choice of stain already exists on the wood from the factory. Some Prefinished are nailed in and some are Click & Lock. Unfinished means it’s raw wood, that’s nailed in and you pick your color to go on it. The color can also be resanded off in the future to change it.

Installation of any Chosen Wood

We have a variety of raw wood, Prefinished, Laminate & Luxury Vinyl Tile. We offer a variety of sizes ranging from 2 ¼” to 8”.

Sand & Finish

When we refinish the floors, we sand them with our big sander machines that have sandpaper on them, which brings the floor to a original raw state, then we stain the floor & three coats of finish to complete it.

Screen & Coat

Sandless Refinishing (rejuvenates & transforms without Sanding)- Consider this maintenance done every 2-3 years. We take the top coat of finish off and recoat it.

Custom Base Colors

You can chose an existing color or we can “Mix Colors” for a Custom look that no one else will have.

Variety of Hardwoods

White Oak, Red Oak, American Cherry, Brazilian Cherry, Walnut, Bamboo, Maple, Brazilian Walnut, Mahogany and the most popular is Hickory. We have exotic woods as well Chestnut, Teak & Australian Cypress.

Glista Finishes/Commercial Finishes (ex: street shoe & traffic)

This finish is Commercial Waterbase finish and not all oil. There’s a huge difference in the way it dries quicker, the way it endures and the look of it.

Medallions

These are custom circular designs or even of animals that we put in the middle of the floor. Medallions look beautiful in foyers, professional office or maybe even in a great room for visual interest.

Diagonal & Custom Installs

We’ll put your floor on a 45 degree angle or in any design you can think of.

Herringbone

A specific back and forth, zig zag pattern.

Checkered

This is a checkered pattern, like a checker board. We can do black and white or gray and white. Any color combination of two colors.

Borders

A border goes around the perimeter of the room and then we straight lay wood in the center or Area Rug in the center.

 

Extras

Chair Pads

Chair pads are available upon request to protect your new wood floors.

Mop Kits

Mop kits are available for purchase to clean your wood floors.

Customer Education

It’s important to know what you’re purchasing, so we educate the consumer on their choices and their products.

Professional & Courteous Crews

All of our Crew members are kind and courteous to people when doing their jobs. They show up on time and quickly get the job done.

Wood Vents/Shoe Molding

Replace your old metal vents with flush wood vents. Shoe molding is what goes all around the perimeter of the floor, next to the wall.

Reducers

This is like a miniature ramp for height differences in floors, such as going from wood to vinyl.

Stairs/Nosings

We can install wood to stairways and nosings for the edge of the stairs. However, we do not do spindles.

T-Mold

A molding that can be applied in between two rooms.

Threshold and Oak Carpet Bar

This is applied if there is a height difference.